Get straightforward next steps when moisture damage, a musty odor or visible mold concerns you. Call any hour to discuss what got wet and what mold remediation may involve.
Your mold removal work involves containment of the affected area, identifying the moisture source, removing uncleanable material and drying whatever can stay.
Mold remediation, mold cleanup, mold abatement and mold mitigation describe related work. The scope should address visible mold growth, damp materials and the water intrusion or humidity problem behind them.
You may need to discard carpet and porous drywall, ceiling tile included. Cleaning and drying are possible for many non-porous surfaces.
Moisture and material shape the cleanup plan.
Stop the water first. To prevent mold growth, dry water-damaged items and areas within 24 to 48 hours, as the EPA advises.
Make your choice based on moisture cause, room or property type. Guides to testing, costs and mold inspection are also available to compare.
Look for affected materials, containment, drying, cleanup and repairs in the scope, along with possible reasons for price changes.
Ask about the approach to finding and correcting a humidity, condensation or leak problem.
If post-remediation verification is needed, an independent assessor avoids having the removal company check its own work.
Avoid disturbing growth, save useful documentation and, if you can do so safely, stop the water.
Call (844) 352-3560Follow mold remediation steps in sequence: assess, set up containment, remove damaged material, clean and dry, verify results, and finally dismantle containment.
A moisture meter helps locate your moisture source and affected materials, with a thermal imaging camera used when helpful.
Use poly sheeting to create a containment barrier. Negative air pressure and a HEPA air scrubber, an air filtration device, limit particles moving into clean rooms.
Workers wear protective equipment. You may need drywall removal or demolition of other porous materials damaged by mold.
Remaining non-porous surfaces are cleaned using damp wiping along with a HEPA vacuum. Air movers, a dehumidifier and moisture readings guide drying.
Post-remediation verification may include a visual check, clearance testing or air sampling by an independent assessor.
Call at any time. A mold cleanup specialist takes your call, outlines what comes next and talks through the moisture problem with you.
Containment matters because disturbing affected materials can move mold spores and dust into clean rooms.
A dry-looking surface can hide wet framing, insulation or subfloor. The affected area is clearer with moisture readings.
Mold can trigger allergy and asthma symptoms in some people. According to the CDC, higher risk applies to people with asthma, lung disease or weakened immune systems.
Search terms include toxic mold and black mold. The CDC says color does not show how risky a mold may be.
Pulling up carpet or cutting into drywall may release particles. To reduce movement, use negative air pressure together with HEPA filtration.
Fixr puts mold remediation nationally at a typical $1,500 to $9,000. The listed professional cost is $10 to $30 for each square foot on areas larger than about 10 square feet. Containment, drying, repairs and materials determine your price along with the affected area.
| More mold removal costs | Published range |
|---|---|
| Crawl space mold removal Source: Fixr, Mold Remediation Cost (checked 2026-10-23) | $500 to $2,000 |
These are published national ranges, not a quote. An on-site assessment establishes the actual price, which you should hear explained prior to the start of work.
Insurance coverage depends on the policy and moisture cause. Long-term leaks, neglect and humidity are often excluded or limited, whereas a sudden water event may qualify if covered.
Ask whether the water event is covered, whether a mold sublimit applies and what an insurance claim needs before materials are removed.
Colorado's rental law, as updated in 2019 and 2024, lists mold tied to dampness that would materially interfere with a tenant's health or safety among the conditions that can make a rental uninhabitable. A 2025 bill that would have added written mold disclosures for sellers and landlords did not pass.
Since 2025, Colorado rental agreements are to say where a tenant can report or deliver written notice of an unsafe or uninhabitable condition, so renters can start with that notice to the landlord.
For an area below about 10 square feet, the EPA says occupants can often do cleanup once the water issue is corrected. HVAC involvement, contaminated water and larger affected areas require professional help.
Not sure? Call (844) 352-3560
Area housing statistics describe local housing, without showing what condition your property is in. Plan access, moisture repairs and records around what an assessment finds.
Census ACS 2024 5-year (tables B01003, B25003, B25035, B09021 and B25024). Area estimates do not establish conditions at an individual property.
Your property needs its own assessment. The area figures do not establish the age or condition of your building. Plan access around the rooms and materials that need attention.
Keep dated photos and repair records. Ask who can authorize access, who will repair the moisture source and which records you should receive when cleanup is complete.
State guidance: Colorado General Assembly, HB19-1170 Residential Tenants Health & Safety Act (summary as enacted); Colorado General Assembly, SB24-094 Safe Housing for Residential Tenants (summary as enacted); Colorado General Assembly, HB25-1202 Increasing Public Awareness of Mold Health Effects (lost); EPA, Who can test my home or clean, fix and remediate my home for mold?; EPA, Region 8 state indoor air quality contacts (PDF)
Mold removal services are available across the city and surrounding communities.
The affected area, drying, material removal and fixing the moisture source determine how long it takes. Request the planned order before work begins.
Yes. Leaving a leak or a humidity or condensation issue unresolved can mean returning mold. Look for the moisture source in your remediation plan, along with explanations of moisture control and drying.
For areas above about 10 square feet, extensive water damage, sewage or contaminated water, or an affected HVAC system, EPA guidance points you toward professional help.
Color alone does not show how risky mold is. Your removal plan should reflect the moisture source, affected area, materials and required containment.
Check around roofs, plumbing, HVAC equipment and windows for moisture signs, visible growth and a musty odor. You can trace damp material with a mold inspection. Mold testing is not required in every case with clear growth and an evident water source.
Across the metro area, calls about musty odors, visible growth and moisture damage are answered 24 hours a day.